|
Repsol Ibertem 99-F

Translation of the original Spanish. In case of a discrepancy, the Spanish original prevails
Description and Recommendations
A natural paraffin mineral oil with high viscosity, formulated with highly refined selected base oils and special additives, which provide the properties required to overcome the difficult conditions needed for hot, rapid steel hardening. Ibertem 99-F is particularly suitable for use in hot, rapid hardening, where the bath temperature is between 150 and 180oC and even higher if there is a closed atmosphere. This kind of oil is used with non-alloy or low alloy parts.
Properties
High cooling speed.Appropriate additives are used to achieve excellent resistance to oxidation and the formation of sludge and dirt, creating a long lasting product.Very good thermal stability and low volatility, which reduces smoke and the risk of fire.Good foam resistance.Avoids surface blackening of the piece to be hardened.Uniform and lasting hardening capacity.
Technical characteristics
|
UNITS |
METHOD |
VALUE |
Appearance |
|
|
Glossy and transparent |
Colour |
|
ASTM D 1500 |
<7 |
Density at 15oC |
g/ml |
ASTM D 4052 |
0,910 |
Viscosity at 40oC |
cSt |
ASTM D 445 |
215 |
Viscosity at 100oC |
cSt |
ASTM D 445 |
18,5 |
Viscosity rate |
|
ASTM D 2270 |
95 |
Flammability V/A |
oC |
ASTM D 92 |
250 |
Aniline point |
oC |
ASTM D 611 |
95 |
Neutralisation index |
mg KOH/g |
|
0,2 |
Noack volatility, 1hr at 150oC |
|
DIN 51581 |
0,30 |
Overview
Bulk and 185 kg cans.
Hazard identification
This product is not classified as toxic or hazardous under current legislation.
Handling
Minimum precautions should be taken to avoid prolonged contact with the skin. The use of
gloves, visors or glasses is recommended to avoid splashes.
Health and safety risks.
Inhalation: As this product has low volatility, the risk of inhalation is minimal.Ingestion: Do not make an affected person vomit. Supply water. Get medical help. Contact with the skin: Wash thoroughly with soap and water.Eyes: Wash thoroughly with water.General measures: Get medical help.
Fire-fighting measures
No special measures required.Extinction: Foams, dry chemicals, CO2, water spray. Do not apply a jet of water directly, as it could spread the product.
Environmental precautions
Danger of physical pollution if spilt (water, coastlines, soil, etc.) due to its floatability and oily consistency that may harm flora and fauna on contact. Prevent the material from entering the water supply. Decontamination and cleaning: Treat as an accidental oil spillage. Avoid dispersion using
mechanical barriers and remove with physical or chemical elements. |
|